Blog
Precautions for the use of high-speed milling chucks
1. When installing the inspection or lubricating the chuck, be sure to turn off all power sources to ensure the safety of the operator.
Release time:
2022-04-25
1. When installing the inspection or lubricating the chuck, be sure to turn off all power sources to ensure the safety of the operator.
2. Do not operate the switching valve when the spindle is rotating. Do not index the chuck until the turret head has returned to a safe position, and do not allow the workpiece or jaws to touch the turret head.
3. The number of revolutions of the high-speed milling chuck should be selected according to the cutting conditions to prevent the workpiece from flying out, and should not exceed the allowable maximum limit. Only when the jaws are designed according to the specification,
The maximum spindle speed that can only be achieved during balancing and machining. Heavy unbalanced jaws have a great impact on the maximum rotation speed. Users should pay full attention when designing the jaws.
4. Before closing the safety door, do not start the spindle switch to prevent the workpiece or high-speed milling chuck from flying out.
5. Do not exceed the maximum operating oil pressure of the chuck to avoid damage to the chuck or fly out of the workpiece.
6. Use a hydraulic station with a check valve to prevent the internal pressure of the oil cylinder from dropping sharply when the power supply is interrupted and the work object flying out.
7. Do not change the chuck at will to avoid damage to the chuck. The worn or damaged high-speed milling chuck should be replaced immediately to prevent the workpiece from flying out during work.
8. Do not drink alcohol or take narcotic drugs before operating the machine.
9. Do not wear gloves or ties when operating the machine.
10. Be sure to use slings or rings when disassembling and assembling the chuck.
11. When clamping the workpiece, please do not get caught.
12. Do not knock the chuck to prevent the jaws or the workpiece from flying out.
13. It should be lubricated regularly to prevent the bearing from rusting or the components being worn out, resulting in poor machining accuracy. It is necessary to carry out regular maintenance for the working environment conditions encountered in the use of the high-speed milling chuck.
high,speed,milling,chuck,supplier,china,high,speed,milling,chuck,from,China
Previous Page
Previous Page
Latest information
2023-03-09
2023-02-28
Contact Us
Tel: +86-519-83208876
Tel: +86-13861278968
Email: carrieshi@terektool.com
Email: monicaduan7@hotmail.com
Address: No.138,wangxia village,luoxi town,xinbei area,changzhou city, jiangsu province,China
Submit your request online
