Blog
Carbide milling cutter maintenance
When the axis line of the carbide milling cutter coincides with the edge line of the workpiece or is close to the edge line of the workpiece, the situation will be very serious, and the operator should do the relevant equipment maintenance work
Release time:
2022-04-01
When the axis line of the carbide milling cutter coincides with the edge line of the workpiece or is close to the edge line of the workpiece, the situation will be very serious, and the operator should do the relevant equipment maintenance work:
1. Check the power and stiffness of the machine to ensure that the required cutter diameter can be used on the machine.
2. The overhang of the tool on the spindle should be as short as possible to reduce the impact of the milling cutter axis and the position of the workpiece on the impact load.
3. Use the correct milling cutter pitch for the operation to ensure that there are not too many inserts meshing with the workpiece at the same time to cause vibration while cutting, on the other hand, to ensure that there are enough inserts when milling narrow workpieces or milling cavities engage with the workpiece.
4. Make sure to use the feed per insert to get the correct cut when the chips are thick enough to reduce tool wear. Indexable inserts with positive rake geometry for smooth cutting results and minimal power.
5. Select the cutter diameter suitable for the width of the workpiece.
6. Select the correct main declination angle.
7. Place the milling cutter correctly.
8. Use cutting fluid only when necessary.
9. Follow tool maintenance and repair rules and monitor tool wear.
Doing a good job in the maintenance of carbide milling cutters can prolong the service life of the tool and improve work efficiency.
good,price,and,quality,carbide,end,mills,carbide,end,mills,for,sale,near,me,carbide,end,mills,manufacturers,Wholesale,carbide,end,mills
Previous Page
Next Page
Previous Page
Next Page
Latest information
2023-03-09
2023-02-28
Contact Us
Tel: +86-519-83208876
Tel: +86-13861278968
Email: carrieshi@terektool.com
Email: monicaduan7@hotmail.com
Address: No.138,wangxia village,luoxi town,xinbei area,changzhou city, jiangsu province,China
Submit your request online
