Blog
How to maintain alloy milling cutter
1. Check the power and rigidity of the machine tool to ensure that the required cutter diameter can be used on the machine tool. 2. The overhang of the tool on the spindle should be as short as possible to reduce the impact of the milling cutter axis and workpiece position on the impact load.
Release time:
2020-06-23
1. Check the power and rigidity of the machine tool to ensure that the required cutter diameter can be used on the machine tool.
2. The overhang of the tool on the spindle should be as short as possible to reduce the impact of the milling cutter axis and workpiece position on the impact load.
3. Use the correct milling cutter pitch suitable for this process to ensure that there are not too many inserts engaging with the workpiece at the same time to cause vibration during cutting. On the other hand, when milling a narrow workpiece or a milling cavity, make sure that there are enough inserts Engage with the workpiece.
4. Ensure that the feed per blade is used so that when the chips are thick enough, the correct cutting effect can be obtained, thereby reducing tool wear. The indexable insert with positive rake angle is used to obtain a smooth cutting effect and power.
5. Choose a milling cutter diameter suitable for the width of the workpiece.
6. Choose the correct lead angle.
7. Place the cutter correctly.
8. Use cutting fluid only when necessary.
9. Follow tool maintenance and repair rules and monitor tool wear.
Previous Page
Previous Page
Latest information
2023-03-09
2023-02-28
Contact Us
Tel: +86-519-83208876
Tel: +86-13861278968
Email: carrieshi@terektool.com
Email: monicaduan7@hotmail.com
Address: No.138,wangxia village,luoxi town,xinbei area,changzhou city, jiangsu province,China
Submit your request online
