Blog
Routine maintenance and maintenance of high precision chuck
1. Do a good job of lubrication to ensure that the high precision chuck still has good precision after long-term use. But incorrect or improper lubrication will lead to some problems, such as weakened clamping force, poor clamping accuracy, abnormal wear, etc., so the high precision chuck must be properly lubricated.
Release time:
2023-01-10
Routine maintenance and maintenance of high precision chuck:
1. Do a good job of lubrication to ensure that the high precision chuck still has good precision after long-term use. But incorrect or improper lubrication will lead to some problems, such as weakened clamping force, poor clamping accuracy, abnormal wear, etc., so the high precision chuck must be properly lubricated.
2. After the high precision chuck is finished, it is necessary to clean the chuck body and slideway surface with an air gun or similar tools.
3. Apply molybdenum disulfide grease (black in color) at least once a day, and pour the grease into the nozzle of the chuck until the grease overflows the jaw surface or the inner hole of the chuck.
4. For different workpieces, use different clamping methods or make special fixtures. If the pressure of the high precision chuck is abnormal, the chuck will be under high pressure, or the chuck will still clamp the workpiece after the machine is turned off, which will reduce the life of the chuck. Therefore, when the gap between the chucks is found to be too large, you must immediately Replace with a new chuck.
5. Remove the high precision chuck every 6 months, disassemble and clean it, and give it lubrication. If the cast iron is cut at least once or several times every 2 months, it should be thoroughly cleaned, and all parts should be checked for cracks and wear, and the severely worn parts should be replaced immediately. After the inspection is completed, it must be fully oiled before it can be assembled.
6. The use of anti-rust cutting oil can prevent the internal rust of the high precision chuck, because the rust of the chuck will reduce the clamping force and cannot clamp the workpiece.
high,precision,chuck
Latest information
2023-03-09
2023-02-28
Contact Us
Tel: +86-519-83208876
Tel: +86-13861278968
Email: carrieshi@terektool.com
Email: monicaduan7@hotmail.com
Address: No.138,wangxia village,luoxi town,xinbei area,changzhou city, jiangsu province,China
Submit your request online
