Number of views:
1000
Ball Nose Tool 2 flutes spiral flat ball nose end mill
Category
Carbide Ball Nose End Mills
Flute: 2/3/4/6 Flutes
Helix: 35/45/55 Helix and Inequality spiral
Hardness : 45HRC,55HRC,60HRC,65HRC,68HRC
Coating : AlTiN,TIAIN,DLC ,TiALSiN
Usage : Cooper, Cast Iron, Carbon Steel, Mould Steel
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
5
Quantity
-
+
Stock:
0
1
Contact Us
Contact information
Tel: +86-13861278968
Email: carrieshi@terektool.com
Share to
Product description
Parameters
Raw materials from word
Parameter of Raw materials
Mirror chip removal slot
High capacity chip removal with stronge cutting,smooth cutting discharge,can achieve high efficiency maching
Suitable workpiece:Carbon steel,Alloy steel,pre-harden steel and harden steel hardness.
Performance
High quality tungsten steel material,wear-resistant,not easy to stick knife.
It is recommended to cut steel parts below 68 degress to extend the service life of the milling cutter.
In the process of using,adding coolant can increase the tool life by 50%.
Advantages
Materials Type | Brand | Original from |
YG25,YL10.2 | ZCCT | Zhuzhou China |
GU20,GU20F,GU25UF | GESAC | XiaMen China |
K2210 | Kennametal | America |
AF K34,K44,K45 | AF | Germany |
Teagutec | Teagutec | Korea |
Parameter of Raw materials
HRC | Materials | Grain Size(μm) | CO(%) | Flexural Strength(N/mm²) |
HRC45 | YG25 | 0.7 | 10 | 2800 |
HRC55 | YL10.2 | 0.6 | 10 | 3800 |
HRC60 | kenanametal2210 | 0.4 | 12 | 4800 |
HRC65 | AF K34 | 0.4 | 9 | 5300 |
Product Characteristics
Mirror chip removal slot
High capacity chip removal with stronge cutting,smooth cutting discharge,can achieve high efficiency maching
Suitable workpiece:Carbon steel,Alloy steel,pre-harden steel and harden steel hardness.
Performance
High quality tungsten steel material,wear-resistant,not easy to stick knife.
It is recommended to cut steel parts below 68 degress to extend the service life of the milling cutter.
In the process of using,adding coolant can increase the tool life by 50%.
Advantages
ALTIN coating from Japan,incresase surface gloss and prolonging life.
Work material:carbide steel,alloy steel,cast iron,copper,mould steel etc.100% original tungsten,without recycle parts.
Wc90%,Co10%,more cobalt will make end mill more crisp.
Keyword:
Best Carbide Ball Nose End Mills
Wholesale Carbide Ball Nose End Mills
Scan the QR code to read on your phone
language
中国
韩国
韩国
韩国
韩国
韩国
1500142340
monicaduan7
Copyright © 2020 Terek Tool Co.,Ltd. All Rights Reserved
Powered by www.300.cn