Solid Tungsten Carbide 2 Flutes 0
Flute: 2/3/4/6 Flutes
Helix: 35/45/55 Helix and Inequality spiral
Hardness : 45HRC,55HRC,60HRC,65HRC,68HRC
Coating : AlTiN,TIAIN,DLC ,TiALSiN
Usage : Cooper, Cast Iron, Carbon Steel, Mould Steel
Category: Carbide Micro-dia End Mills
Raw materials from word
| Materials Type | Brand | Original from |
| YG25,YL10.2 | ZCCT | Zhuzhou China |
| GU20,GU20F,GU25UF | GESAC | XiaMen China |
| K2210 | Kennametal | America |
| AF K34,K44,K45 | AF | Germany |
| Teagutec | Teagutec | Korea |
Parameter of Raw materials
| HRC | Materials | Grain Size(μm) | CO(%) | Flexural Strength(N/mm²) |
| HRC45 | YG25 | 0.7 | 10 | 2800 |
| HRC55 | YL10.2 | 0.6 | 10 | 3800 |
| HRC60 | kenanametal2210 | 0.4 | 12 | 4800 |
| HRC65 | AF K34 | 0.4 | 9 | 5300 |
Product Characteristics
Mirror chip removal slot
High capacity chip removal with stronge cutting,smooth cutting discharge,can achieve high efficiency maching.
Suitable workpiece:Carbon steel,Alloy steel,pre-harden steel and harden steel hardness.
Performance
High quality tungsten steel material,wear-resistant,not easy to stick knife.
It is recommended to cut steel parts below 60 degress to extend the service life of the milling cutter.
In the process of using,adding coolant can increase the tool life by 50%.
Advantages
ALTIN coating from Japan,incresase surface gloss and prolonging life.
Work material:carbide steel,alloy steel,cast iron,copper,mould steel etc.100% original tungsten,without recycle parts.
Wc90%,Co10%,more cobalt will make end mill more crisp.
Keywords： Solid Tungsten Carbide 2 Flutes 0
Online Message
If you have any suggestions, please leave a message or send an email to us, and we will reply to you within 1 working day after receiving the message email.
Contact Us
Tel: +86-519-83208876
Tel: +86-13861278968
Email: carrieshi@terektool.com
Email: monicaduan7@hotmail.com
Address: No.138,wangxia village,luoxi town,xinbei area,changzhou city, jiangsu province,China
Submit your request online