What is the reason for the poor finish of the parts produced by the CNC drilling bits machine tool

Categories:nc drill bits news
Author:
Origin:
Time of issue:2022-06-27 16:57
Views:

(Summary description)The tool tip of the CNC drilling bits machine tool is not sharp. It is recommended to re-sharpen the tool directly or re-calibrate the tool after changing the tool.

nc drill bits For sale





What is the reason for the poor finish of the parts produced by the CNC drilling bits machine tool

(Summary description)The tool tip of the CNC drilling bits machine tool is not sharp. It is recommended to re-sharpen the tool directly or re-calibrate the tool after changing the tool.

Categories:nc drill bits news
Author:
Origin:
Time of issue:2022-06-27 16:57
Views:

Information

1. The tool tip of the CNC drilling bits machine tool is not sharp. It is recommended to re-sharpen the tool directly or re-calibrate the tool after changing the tool.

nc drill bits company

2. The CNC drilling bits machine tool has resonance during operation, mainly because the position of the machine tool is not stable. It can be solved by adjusting the machine tool to the horizontal position and fixing it firmly.
3. The crawling phenomenon of the CNC drilling bits machine tool is mostly due to the severe wear of the pallet guide rails and the wear or loosening of the screw balls. When this happens, because the machine tool maintenance is not enough, it is recommended to clean the iron wire and add lubricating oil in time to reduce the problem in time. At the same time, it is necessary to increase the maintenance times of the machine tool. It is recommended to perform idle maintenance every 2-3 days. If the processing volume is large and the processing is all-weather, it is recommended to clean the wire and replenish the lubricating oil every day. At this time, don't care about the consumption of lubricating oil. After all, the cost of lubricating oil is much lower than the output
4. The processing technology is not perfect. Under the processing requirements of other processes, a higher speed should be selected as much as possible, and a coolant suitable for workpiece processing should be selected.

Keyword:

Scan the QR code to read on your phone

Previous: Common drill bits for CNC machining centers

Next: What is a Carbide Drill

Previous: Common drill bits for CNC machining centers

Next: What is a Carbide Drill

Latest News

How to choose a milling chuck manufacturer

With the gradual increase in the types of milling chucks, manufacturers of large and small milling chucks have also appeared before our eyes. So, how do we choose the right milling chuck manufacturers in a mixed environment? Today I will make a detailed introduction for everyone, and I hope it will be helpful to the majority of buyers.

→