搜索
Search
logo
这是描述信息

NEW CENTER

Wear forms and preventive measures of high hardness end mills

(Summary description)The basic law of wear of high hardness end mills is similar to that of turning tools. The cutting thickness of high-hardness end mills is small, especially when up-milling, the cutter teeth squeeze and slide seriously on the surface of the workpiece, so the wear of the milling cutter mainly occurs on the back.

Wear forms and preventive measures of high hardness end mills

(Summary description)The basic law of wear of high hardness end mills is similar to that of turning tools. The cutting thickness of high-hardness end mills is small, especially when up-milling, the cutter teeth squeeze and slide seriously on the surface of the workpiece, so the wear of the milling cutter mainly occurs on the back.

Information

The basic law of wear of high hardness end mills is similar to that of turning tools. The cutting thickness of high-hardness end mills is small, especially when up-milling, the cutter teeth squeeze and slide seriously on the surface of the workpiece, so the wear of the milling cutter mainly occurs on the back. When milling steel parts with tungsten steel face milling cutter, due to the high cutting speed, the sliding speed of chips along the front is large, so the rear wears at the same time, and the front also has a small milling cutter wear.

high hardness end mills For sale

Prevention measures for tungsten steel milling cutter

(l) Reasonable selection of milling cutter blade grades: blade materials with high toughness, low thermal crack resistance, and good heat resistance and wear resistance should be used.
(2) Reasonable selection of milling amount: Under certain processing conditions, there is a safe working area that does not cause damage. Selecting Vc and ∫z within the safe working area can ensure the normal operation of the milling cutter and prevent the milling cutter from being worn.

(3) Reasonable selection of the relative position between the workpiece and the milling cutter: Reasonable selection of the installation position of the face milling cutter plays an important role in reducing the wear of the face milling cutter.

Keyword:

Scan the QR code to read on your phone

Latest News

Factors that should be considered in the selection of cemented carbide milling cutters

Factors that should be considered in the selection of cemented carbide milling cutters

When selecting cemented carbide milling cutters, the dimensional accuracy requirements of cutting processing must first be considered.
这是描述信息
language
中国
韩国
韩国
韩国
韩国
韩国

1500142340

monicaduan7

No.138,Wangxia Village,Luoxi Town,Changzhou City,Jiangsu Province,China

 

SEO tags

Copyright © 2020 Terek Tool Co.,Ltd. All Rights Reserved  

Powered by www.300.cn   苏ICP备2020059685号