How to install the milling cutter chuck

Categories:milling cutter news
Author:
Origin:
Time of issue:2022-03-18 10:19
Views:

(Summary description)The milling cutter chuck is a chuck that is installed at the end of the milling machine spindle and used to clamp the milling cutter.

milling chuck





How to install the milling cutter chuck

(Summary description)The milling cutter chuck is a chuck that is installed at the end of the milling machine spindle and used to clamp the milling cutter.

Categories:milling cutter news
Author:
Origin:
Time of issue:2022-03-18 10:19
Views:

Information

The milling cutter chuck is a chuck that is installed at the end of the milling machine spindle and used to clamp the milling cutter. The following is a high-speed milling cutter head supplier to explain to you how the milling cutter head fixes the milling cutter.

Milling cutters are often used in the daily machining of molds, and are rotary tools with one or more teeth for milling. When working, each cutter tooth cuts off the allowance of the workpiece intermittently in turn.
(1) Installation of shank milling cutter

1. Installation of straight shank milling cutter: The straight shank milling cutter is usually installed with a spring chuck. When installing, tighten the nut to make the spring sleeve shrink radially and clamp the cylindrical shank of the milling cutter.

2. Installation of the tapered shank milling cutter: When the size of the tapered shank of the milling cutter is the same as that of the tapered hole at the end of the spindle, it can be directly inserted into the tapered hole and tightened with a tie rod. Otherwise, use a transition cone for installation

Mounting of hole cutters

The milling cutter with holes should be installed with a milling cutter rod. First, insert one end of the cone of the milling cutter rod into the taper hole of the spindle, and tighten it with a tie rod. Adjust the appropriate position of the milling cutter through the sleeve, and the other end of the cutter bar is supported by a hanger.

Keyword:

Scan the QR code to read on your phone

Previous: How to choose alloy milling cutter correctly

Next: How to maintain alloy milling cutter

Previous: How to choose alloy milling cutter correctly

Next: How to maintain alloy milling cutter

Latest News

How to choose a milling chuck manufacturer

With the gradual increase in the types of milling chucks, manufacturers of large and small milling chucks have also appeared before our eyes. So, how do we choose the right milling chuck manufacturers in a mixed environment? Today I will make a detailed introduction for everyone, and I hope it will be helpful to the majority of buyers.

→