Daily inspection of horizontal boring and milling machines

Categories:Industry News
Author:
Origin:
Time of issue:2022-09-07 14:25
Views:

(Summary description)The joystick should be flexible. When the joystick is pulled to the "start" position, the rocker arm that presses the friction plate should reach the self-locking position to ensure reliable positioning.

boring head bar products





Daily inspection of horizontal boring and milling machines

(Summary description)The joystick should be flexible. When the joystick is pulled to the "start" position, the rocker arm that presses the friction plate should reach the self-locking position to ensure reliable positioning.

Categories:Industry News
Author:
Origin:
Time of issue:2022-09-07 14:25
Views:

Information

1. The joystick should be flexible. When the joystick is pulled to the "start" position, the rocker arm that presses the friction plate should reach the self-locking position to ensure reliable positioning.
2. The worktable of the boring machine should have a positioning plate to prevent the four-claw seat from exiting.
3. When processing eccentric workpieces, counterweight iron must be added to maintain the balance of the workbench. The counterweight must be clamped firmly to prevent it from being thrown and hurting people.

boring head bar company

4. The friction clutch in the quick-travel mechanism must be in good condition, and can play a protective role when the load is too large.
5. The safety pin in the safety connector in the feed box must meet the design requirements to prevent accidents caused by overloading.
6. There should be a limit device to prevent the boring machine beam and tool rest from exceeding the stroke when moving.
7. The operating platform should have a bar and a bottom guard. Collectors retreat 1, 8 All operating handwheels should have positioning devices and obvious gear signs. The bolts and nuts for pressing the handwheel should be complete, intact and fastened.
8. The triangle tape and the coupling between the main motor and the gearbox should be equipped with a protective cover.
9. The worktable of the boring machine should be fenced to prevent injury when the worktable rotates.
10. A chip baffle should be set around the worktable.
11. Wooden pedals should be installed.

Keyword:

Scan the QR code to read on your phone

Previous: Processing characteristics of stainless steel end mills

Next: Common milling forms of milling cutters in CNC machining

Previous: Processing characteristics of stainless steel end mills

Next: Common milling forms of milling cutters in CNC machining

Latest News

How to choose a milling chuck manufacturer

With the gradual increase in the types of milling chucks, manufacturers of large and small milling chucks have also appeared before our eyes. So, how do we choose the right milling chuck manufacturers in a mixed environment? Today I will make a detailed introduction for everyone, and I hope it will be helpful to the majority of buyers.

→