Precautions for daily maintenance of fine-tuning fine boring tools

Categories:Boring Head Bar News
Author:
Origin:
Time of issue:2022-09-05 15:04
Views:

(Summary description)When installing the fine boring tool, first check whether the inner hole of the interface where the fine boring tool is connected to the shank has dust, dirt and rust.

boring head bar Wholesale Price





Precautions for daily maintenance of fine-tuning fine boring tools

(Summary description)When installing the fine boring tool, first check whether the inner hole of the interface where the fine boring tool is connected to the shank has dust, dirt and rust.

Categories:Boring Head Bar News
Author:
Origin:
Time of issue:2022-09-05 15:04
Views:

Information

1) When installing the fine boring tool, first check whether the inner hole of the interface where the fine boring tool is connected to the shank has dust, dirt and rust. If there is, the inner hole of the interface connection position should be cleaned before installing the fine boring tool.
2) Before installing the fine boring tool, check whether the fine boring tool has any signs of damage, whether the position of the modular interface is complete and clean, whether the dial is blocked by hand, and whether the dial can be screwed to the maximum or minimum value. value. If one of the above conditions does not meet the requirements, the fine boring tool should be replaced.

3) It is strictly forbidden to use cotton yarn when wiping the fine boring tool, so as to prevent the fine hair falling off the cotton yarn from remaining on the connection position of the fine boring tool modular interface, which will affect its accuracy.
4) When disassembling the fine boring tool, first loosen the locking screw at the connection position of the interface, grab the fine boring tool body and take it out slowly. If the fine boring tool is not easy to remove, you can not remove the locking screw first, then rotate the fine boring tool body by hand until the fine boring tool is loose, and then remove the fine boring tool from the tool holder.
5) After the fine boring tool is removed, it should be carefully wiped clean without leaving water stains on it, and it should be properly stored after applying anti-rust oil.

Keyword:

Scan the QR code to read on your phone

Previous: Daily inspection of horizontal boring and milling machines

Next: None

Previous: Daily inspection of horizontal boring and milling machines

Next: None

Latest News

How to choose a milling chuck manufacturer

With the gradual increase in the types of milling chucks, manufacturers of large and small milling chucks have also appeared before our eyes. So, how do we choose the right milling chuck manufacturers in a mixed environment? Today I will make a detailed introduction for everyone, and I hope it will be helpful to the majority of buyers.

→