搜索
Search
logo
这是描述信息

NEW CENTER

Classification of hydraulic power chucks

(Summary description)The wedge structure is a common structural form of hydraulic power chuck, which converts the axial movement of the chuck piston into the radial movement of the jaw through the wedge groove mechanism.

Classification of hydraulic power chucks

(Summary description)The wedge structure is a common structural form of hydraulic power chuck, which converts the axial movement of the chuck piston into the radial movement of the jaw through the wedge groove mechanism.

Information

1. Wedge hydraulic power chuck
The wedge structure is a common structural form of hydraulic power chuck, which converts the axial movement of the chuck piston into the radial movement of the jaw through the wedge groove mechanism.

power milling chuck supplier china

2. Helical slider hydraulic power chuck
The chuck of this structure first converts the axial movement of the chuck piston into the movement of three sliders in its chute through the wedge groove mechanism. The teeth form an inclined surface meshing relationship, and the movement of the slider drives the jaws to move radially to clamp the workpiece. The clamping force is large, the clamping precision is high, and the mechanism wear is small.
3. A lever type power chuck
The piston drives the wedge block through the wedge mechanism, and then drives the jaw through the straight lever. In this structure, the mass of the jaws is small, and the centrifugal force of the wedge tooth block compensates the centrifugal force of the jaws, which reduces the loss of clamping force and is beneficial to increase the rotational speed. The fulcrum of the lever is designed as a spherical support to withstand higher pressure.
4. Pull-in chuck
The chuck is generally used to clamp slender shafts, and is locked by the axial movement of the jacket and the change of the diameter of the jacket through the cooperation of the tapered surface.
 

Keyword:

Scan the QR code to read on your phone

Latest News

How to reduce wear on turning inserts

How to reduce wear on turning inserts

First, the turning test was carried out with the cutting amount as the changing condition, and the cutting force and cutting temperature were studied; then the thermodynamic characteristics of the turning insert were studied.
这是描述信息
language
中国
韩国
韩国
韩国
韩国
韩国

1500142340

monicaduan7

No.138,Wangxia Village,Luoxi Town,Changzhou City,Jiangsu Province,China

 

SEO tags

Copyright © 2020 Terek Tool Co.,Ltd. All Rights Reserved  

Powered by www.300.cn   苏ICP备2020059685号