搜索
Search
logo
这是描述信息

NEW CENTER

How to choose the power end mill chuck

(Summary description)When using a vertical milling machine to process some long rectangular templates, it is often necessary to use both milling cutters and end milling cutters together.

How to choose the power end mill chuck

(Summary description)When using a vertical milling machine to process some long rectangular templates, it is often necessary to use both milling cutters and end milling cutters together.

Information

When using a vertical milling machine to process some long rectangular templates, it is often necessary to use both milling cutters and end milling cutters together. Such frequent tool changes have lowered the work efficiency. How to achieve efficient production? This requires end mill chucks. There are two types of end mill chucks that are most used on the market, one is a chuck with good concentricity (such as a spring chuck), and the other is a side locking chuck collet.

power milling chuck supplier china

Taking the collet as an example, the collet is composed of a collet body, an elastic collet inserted into the collet body, and a nut sleeved on the collet to tighten the thread. When the nut is tightened, the elastic collet surrounding the round shank exerts a strong clamping force on the shank, so the tool can obtain longer life and higher feed rate, and can improve the surface finish of the workpiece, but This collet has no physical stop mechanism, so it is easy to cause deflection of the collet.

The side locking chuck will push the tool away from the center position when clamping, so the cutting edge on one side of the milling cutter will bear more cutting load. Once the cutting edge is worn, the entire tool will fail prematurely, but under heavy load Tightening screws prevent the tool from being pulled out of the collet hole when roughing.
 

Keyword:

Scan the QR code to read on your phone

Latest News

How to reduce wear on turning inserts

How to reduce wear on turning inserts

First, the turning test was carried out with the cutting amount as the changing condition, and the cutting force and cutting temperature were studied; then the thermodynamic characteristics of the turning insert were studied.
这是描述信息
language
中国
韩国
韩国
韩国
韩国
韩国

1500142340

monicaduan7

No.138,Wangxia Village,Luoxi Town,Changzhou City,Jiangsu Province,China

 

SEO tags

Copyright © 2020 Terek Tool Co.,Ltd. All Rights Reserved  

Powered by www.300.cn   苏ICP备2020059685号